Current Booster
The Booster 10A module increases the maximum current of the PGSTAT100 or PGSTAT302 to 10 A. The maximum current of the PGSTAT302 can be increased to 20 A with Booster 20A. When working in combination with the booster the compliance voltage of the PGSTAT100/302 is reduced to 20 V.
With its fast response time, the Autolab booster has been optimized to perform electrochemical impedance measurements, in combination with the FRA2 module, on fuel cells, batteries and super-capacitors. The booster is able to handle active as well as passive cells.
With the booster you can measure the charge and discharge characteristics of super-capacitors, perform measurements on fuel cells or perform DC or AC measurements on large area electrodes.
Application areas:
- All DC and AC electrochemical measurements on large area electrodes
- Determination of charge discharge characteristics of super-capacitors
- Electrochemical impedance measurements on fuel cells, batteries and super-capacitors
- Measurements of the I - V characteristics of fuel cells
